![]() While trying to find this solution I made so many of them I don’t know for sure.Īnyways: After making these steps I was able to select every possible input and output combination for my Audio 6 in Ableton – and all of them worked like a charm. I don’t know if it’s necessary to do a reboot afterwards. Additionally, you can utilize an external mixer using the separate stereo outputs, thanks to the two timecode vinyls. It’s probably a good idea to do this in the ‘startup’ tab since this changes the device’s configuration to behave like this automatically every time you connect it to your computer. Starting with the high-quality TRAKTOR AUDIO 6 soundcard, two stereo inputs, two stereo outputs, a main stereo input and output, and a headphone jack for monitoring, you'll gain a complete digital vinyl system in a single bundle. The solution is simple: Just open up the Audio 6 Control Panel and deactivate the checkbox for ‘direct thru’-mode. ![]() I had to deactivate this every time I used it. Looking at it from a little distance it’s something I could have known before because every time I had Traktor Scratch running and attached the Audio 6 to my computer I was presented with a ‘direct thru’-configuration for both decks. The device itself is not able to send audio data to these outputs in this case. Meaning: Everything that is connected to the inputs is directly routed to the outputs. The problem behind all this is that the Audio device’s input settings for both channels 3/4 and 5/6 was set to ‘direct thru’. Whatever I tried it only sent out real music (into my mixing desk) when I selected channel ‘1/2’ for Master out. The Z1 includes a e-voucher use it to purchase TRAKTOR PRO 3 or any other downloadable NI software. Two software decks, three effects, and all you need to get the party going. I had a simple clip running on a track and changed the Master Out settings a few times. TRAKTOR KONTROL Z1 comes with the introductory TRAKTOR LE software to get you started. The screenshot only shows the output config but the input settings were accordingly. Of course the settings in Ableton all were correct. Same problem on the inputs: I have two turntables attached to the Audio 6 and wanted to use their inputs within a vst-plugin (MsPinky, as you may have guessed) but I just wasn’t able to get any signals coming into Ableton. TRAKTOR PRO 3 sees a series of changes to our audio engine, designed with club- sized sound systems in mind. Everything else could be selected but just didn’t take effect (Ableton wasn’t even showing any kind of levels). Basically I couldn’t route Ableton’s output to anything different then ‘Output 1&2’ which is the main output at the Audio 6’s front side. I don’t know why I have never encountered this problem before but recently I tried to use my Traktor Audio 6 together with Ableton and had a fair share of problems.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |